iNTERFACEWARE™ Inc.

Creating the Outgoing Configuration Format

The next step is to create the outgoing configuration format, which is based on your incoming configuration format.

	It makes sense to choose configuration names which reflect what they are used for. In this case incoming and outgoing were chosen. You must be careful to edit the correct configuration when adjusting the mappings, or you will get unexpected results.

To create the outgoing configuration:

• Click the Configuration ellipsis button above the Workspace. The iNTERFACEWARE Chameleon Configuration window appears.

Adding a Configuration

• Click Add. The Add New Configuration window appears.
• In the Configuration Name field, type in outgoing.
• Leave the Copy settings from field as incoming, and click OK.

Add New Configuration Window

• Click Close after you have successfully created the outgoing configuration.
• Switch to the outgoing configuration using the Configuration drop-down arrow above the Workspace.